Over the years, we have developed a strong distributor network. However, there are still areas where we would like to increase our distribution coverage.
If you are interested in becoming an ATOMIUM distributor, please, contact us:
info@atomium.eu, (+420) 217-217-777
Become a dealer!
Your name*
Country*
City*
Website
Contact phone number*
E-mail*
Additional information

Please enter the symbols from the image
Become a dealer Buy ATOMIUM online!
What is ATOMIUM?
Where to apply ATOMIUM tribotechnical compounds?
How does ATOMIUM work?
Technology. Principle of action.
Effects of application
Solve your engine problems now!

Atomium MAX 200 Engine

Price: 95.55 €
(inc. VAT)
Sale: -20% 76.44 €
Volume: 200 ml
  • Features
  • Usage
  • Effects

Features

The compound is designed to protect against wear, increase the engine lifetime and recovery characteristics of diesel engines with displacement of more than 5 liters (5000 cm3) during regular operation.

Usage

Tribotechnical compound is applied in several stages by the following procedure:  Tribotechnical compound «MAX ISE» is applied in accordance with the following procedure:

  1. Warm up the engine up to operating temperature (regular operation).
  2. Stop the engine
  3. Shake the can thoroughly until natural sediments (active components) are totally dissolved.
  4. Add in the compound into the oil filler neck of the engine at the rate of 5 ml per 1 liter of oil (see the marks on the cut of label).
  5. After applying the engine should run (it is recommended to drive the car) no less than 20 - 25 min. in mode of regular operation.

After the procedure you can use the car as usual.

Full treatment is performed as follows:

1 stage adding the compound to the working oil:
5 ml of compound per 1 liter of oil
  Mileage is 2000 km (40 working hours for special machinery)
Changing the oil and oil filter
2 stage adding the compound to the new oil:
5 ml of compound per 1 liter of oil
  Mileage to the next regular oil replacement
Changing the oil and oil filter
               Regular operation (or go to stage 3)

For engines with mileage more than 200 000 km:

3 stage adding the compound to the new oil:
5 ml of compound per 1 liter of oil
  Mileage to the next regular oil replacement
Changing the oil and oil filter
             Regular operation (or go to stage 4)

For engines with mileage more than 500 000 km:

4 stage adding the compound to the new oil:
5 ml of compound per 1 liter of oil
  Mileage to the next regular oil replacement
Changing the oil and oil filter
              Regular operation (or go to stage 4)

Effects

  • Increases power
  • Decreases fuel consumption
  • Decreases oil burn
  • Decreases noise and vibration levels
  • Decreases toxicity and smoke of exhaust gases

Preventive effects:

  • Increases engine lifetime
  • Protects against wear at startup
  • Facilitates engine startup
  • Protects engine in extreme working conditions