Fuel additives
Additive ATOMIUM MAX HPFP to clean fuel pumps for trucks and machinery
Additional info
Video
Useful articles
Popular articles
Additive MAX 200 HPFP is designed to restore performance and extend the life of high pressure fuel pumps diesel engines trucks and special equipment:
Tribotechnical compound MAX HPFP is applied in two stages. At each stage of treatment you must add compound MAX HPFP in the fuel tank as follows:
Shake the can with compound MAX HPFP thoroughly until natural sediments (active components) are totally dissolved.
Add the compound in the fuel tank before the next refueling.
Fill the tank with about 200 liters of diesel fuel. (See dosage in the notes to the smaller volume tanks).
Immediately after applying it is recommended to drive the car for no less than 20 - 25 min in the regular operation mode.
After the procedure, you can use the car as usual.
After 2500 - 3000 km it is necessary to conduct the second step of the treatment and repeat the whole procedure with MAX HPFP.
Thoroughly stir the contents of the can with MAX HPFP
Add the compound in the fuel tank before the next refueling.
Fill the tank with about 200 liters of diesel fuel.
Drive the car for no less than 25 - 30 min. in the regular operation mode.
Additive for restoring the working surfaces of gears, reducing the noise and vibrations during their operation.
Oil additive to maintain performance characteristics and reduced wear of any type of engine after its complete treatment with other compounds of Active series. It should be added to motor oil after each (or at least each second) oil change.
Oil additive for restoring characteristics of gasoline engines of passenger cars with mileage more than 50.000 kilometers. May be used also for CNG and LPG engines.
Motor oil additive for restoring engine performance characteristics: compression, power, acceleration, effective fuel consumption, as well as for extending the wear life and protection in emergency situations.