Atomium AGSB 80
Effects of application
Compound AGSB partially restores worn parts, optimizes gaps in friction pairs, keeps a denser oil layer on the surface of parts. In an automatic transmission this allows to:
Facilitate the gear changes. Optimization of gaps in the oil pump of an automatic gearbox provides nominal oil pressure, which reduces the likelihood of shocks and jerks during gear changes;
Reduce noise and vibration level. Optimization of gaps and restoration of bearings reduce noise and vibration in gear box;
Increase free run. Retention of a denser oil layer on the surface reduces the frictional losses and by this increases free run: movement the car in neutral gear.
Protect the gearbox against wear. Protective layer on the friction surfaces and dense oil layer substantially reduce wear and increase the service life of the unit.
Application of AGSB in variators allows to:
Restore the chain tension. Restoring cone geometry as well as retention on the surface of a denser layer of oil, which provides the clutch of the chain and variator cones, is able to prevent slippage of the chain.
Extend the life of the unit. Cone surfaces treated with the compound wears significantly less during use, which prolongs the life of the unit.
Application of the compound in new gearboxes reduces the risk of "abrasions" and greatly facilitates and accelerates the process of running-in of parts.
Tribotechnical compound «Atomium AGSB»
Compound « Atomium AGSB» is designed to protect against wear, extend the life and restore characteristics of automatic gear boxes and variators of any type with any type of transmission oil.
Tribotechnical compound « Atomium AGSB»
Certified in accordance with the international quality standard
Storage temperature: from -20 ᵒС to +70 ᵒС
Shelf life: 5 years
Safety precautions and first aid:
It is not expected any health hazard when used under normal conditions.
In case of a contact with skin, wash out with warm water, and then wash again with soap.
In case of contact with eyes, wash out eyes with large amount of water.
In case of swallowing, consult a doctor.
Shelf life: 5 years. Manufacturing date is indicated on the can.
It is not recommended to apply the compound at existence of mechanical breakages of parts and assemblies, particularly at slippage of clutch.
Compound AGSB is compatible with any type of gearbox oil.
Compound AGSB does not interact with gearbox clutch and does not affect its wear and performance.
The sediment on the bottom of the can is the main working element of AGSB - these are microparticles of minerals. It is crucially important to stir thoroughly the contents of the can before pouring it in the gearbox oil system (sediment color, depending on the release batch, can vary from light green to black).
Overdose of compound by 1.5-2 times is not dangerous for the gearbox and does not disturb its work.
Compound AGSB does not affect the characteristics and status of parts made of composite materials and rubber.
Instructions for application
Treatment of automatic gearboxes of all types is carried out as follows:
Warm up the engine and gearbox to operating temperature (regular operation).
Stop the engine.
Stir the contents of the can thoroughly until natural sediments (active components) are totally dissolved.
Apply 1 can of compound AGSB through the regular filling neck.
Apply two cans of compound AGSB if the volume of transmission fluid in the gearbox is more than 10 liters.
Immediately after applying drive the car for no less than 20 - 25 min. in of the regular operation mode.
After the procedure, you can use the car as usual.
For continuous trouble-free operation of your gearbox it is recommended to apply compound AGSB after each scheduled replacement of the gearbox transmission oil.