Used for prolonging resource of the engine. Reduces oil burning, noise, hum, vibration
Engine oil additive for restoring engine performance characteristics: compression, power, acceleration, effective fuel consumption, as well as for extending the wear life and protection in emergency situations. It will get rid of oil extra usage and engine smoke. The compound is designed for the treatment of gasoline and gas engines (LPG, CNG) of passenger cars with a mileage less than 50,000 kilometres. Suitable for all engine types and designs, including turbocharged and non-turbocharged.
Oil additive "Active Gasoline New” is designed to restore performance and protect against wear of gasoline, LPG, CNG engines of passenger cars with a mileage less than 50,000 kilometres. It can be used for accelerated and turbocharged engines.
Treatment of the engine with tribotechnical compound "Active" is performed in two stages. At each stage it is necessary to add the compound to the engine oil according to the following procedure:
- Warm up the engine to operating temperature (normal operation).
- Turn off the engine.
- Carefully mix the contents of the bottle so that the sediment at the bottom is distributed throughout the entire volume of the liquid.
- Pour 1 bottle of the compound into the oil filler neck of the engine. (If the volume of the oil system is more than 5 litres, it is necessary to fill two bottles of the composition).
- Immediately after adding the compound, make a trip by car for 20-25 minutes in normal operation.
- After the application of the compound, the car can be used as usual.
Complete treatment of the engine is performed according to the following scheme:
|Oil volume in the oil pan:|
|Stage||From 2 to 5 ltrs||From 5 to 10 ltrs|
|1 stage:||1 can||2 cans|
|About 1000 km of mileage till the oil replacement.|
|Changing the oil and oil filter|
|2 stage:||1 can||2 cans|
|Run the car in regular mode till the oil replacement.|
|Change oil and oil filter|
* If the mileage before the regular oil change is more than 1000 km, it is necessary to conduct a drip oil test every 500-1000 km. If the oil has become densely black, it is necessary to make its early replacement and go to the second stage.
- To maintain engine performance we recommend to use multi-function cleaning additive to the gasoline fuel SUPROTEC "SGA (SGA)";
- To restore the transmission resource, it is recommended to use tribotechnical compound "MGSB", "AGSB", "REDUCER»;
- To restore the characteristics of the power steering system, we recommend the compound "HPS";
Atomium Aprohim™ SGA fuel additive gently cleans fuel equipment, lubricates it, protects it from corrosion and prevents the formation of sludge.
Oil additive to restore working characteristics of mechanical gearboxes of all types. It is also suitable for robotic gearboxes as they use the same type of torque transmission mechanism.
Removes kicks and jerks Transmission oil additive - AGSB (80 ml) is designed to protect against wear, extend the life and restore the characteristics of automatic gearboxes, including variators, of any type and with any type of transmission oil.
Long-term flushing ATOMIUM APROHIM™ is designed to clean the internal surfaces of the engine from long-standing deposits, removes black sludge and other contaminants and deposits.
Oil additive for restoring characteristics of diesel engines with mileage more than 50.000 kilometers. increases compression, power, acceleration, reduces fuel consumption.