Usage of fuel additive to gasoline ATOMIUM Aprohim SGA

50 ml bottle is designed for 40-60 litres of fuel (approximately 1 ml per 1 litre of fuel). Before refuelling the car, fill the additive in the fuel tank.

To do this:

• shake the contents of the bottle thoroughly;
• open the bottle and pour the additive into the fuel tank (use the fuel funnel if necessary);
• fill the car with fuel.

When the car has run more than 50,000 kilometres during the first two refuelling it is recommended to fill 2 bottles of 50 ml per 40-60 litres of fuel (or at the rate of 2 ml per 1 litre of fuel).

Shelf life is 2 years.

The formula of the additive "SGA" is a proprietary development of the company Suprotec EU s.r.o.. All additive components are manufactured in Germany under a direct agreement with the manufacturer.

The additive has passed an annual cycle of bench tests and testing on cars of different classes in several regions of EU using fuel from various filling networks.

The composition of " SGA "is carefully balanced to ensure the safety of its use. Cleaning of fuel equipment is carried out gradually and "gently" due to the use of surfactants, rather than active solvents. The mechanism of action of surfactants guarantees the safety of additives for fuel filters, fuel equipment elements made of plastic and composite materials, and iron-containing materials.

The additive in gasoline fuel  Atomium Aprohim™ " SGA " does not contain octane correctors, does not change the temperature or speed of fuel combustion.

Additive Atomium Aprohim™ "SGA"  can be used with all types of injection systems. Special attention was paid to the effectiveness and safety of the additive in direct fuel injection systems (TFSI, TSI, GDI and other brands), which operate under high pressure in the fuel ramp, and, therefore, have an increased level of requirements for the accuracy of the injectors. Even minor contamination of the nozzle leads to a significant imbalance in the operation of electrohydraulic injectors and injectors using piezoelectric valves, which disrupts the fuel injection mode and ultimately leads to a rapid failure of the injectors (the winding of an electromagnet or piezo crystal). In external mixing systems (injection and carburetor), the additive remains effective since the action of cleaning components does not depend on the pressure in the fuel system and the device of aggregates.

CAUTION! FLAMMABLE LIQUID! PROTECT FROM DIRECT SUNLIGHT AND HEAT ABOVE 40C! STORE IN A COOL, WELL-VENTILATED PLACE IN A TIGHTLY CLOSED / SEALED CONTAINER.

SGA additive is recommended to be used primarily for restoring the performance of fuel injectors and injectors. Symptoms of their malfunction due to contamination may include the following signs:

• Increase fuel consumption by 1 litre or more;
• Drop in car acceleration dynamics;
• "Hard" engine operation;
• Increase fuel consumption;
• The characteristic smell of unburned fuel from the muffler;
• Engine roughness at idle;
• Black smoke at a sharp speed set;
• Difficult cold engine start;

All this indicates a violation of the correct and timely supply of fuel to the combustion chambers of one or more cylinders. Constant use of " SGA " for several gas stations in a row with a high degree of probability will get rid of these problems.