Cleaning and restoring of high pressure fuel pump diesel Atomium HPFP

The high-pressure pump treatment procedure is following:

• Thoroughly shake the bottle to stir the sediment on the bottom over entire liquid volume;
• Before refuelling, add half the contents of the bottle to the fuel tank (see the marks on the label section). The exact dosage of the composition is about 1 ml of the composition per 1 litre of fuel;
• Fill the full tank with diesel fuel.

Right after the refuelling the car can be used in normal operation. After 2000-2500 kilometres the procedure must be repeated:

•  Shake the bottle to steer the rest of sediment;
•  Before refuelling add the second half of the composition bottle to the fuel tank;
•  Fill the full tank with diesel fuel.

Precautionary measures: 

• Does not pose a health hazard under normal conditions of use.
• In case of skin contact, wash the exposed area with warm water and then with soap and water.
• In case of contact with eyes, rinse them with plenty of water.
• In case of contact with the digestive system, consult a doctor.

Notes: 

• The shelf life is 5 years. The date of manufacture is indicated on the label
• It is not recommended for use in mechanical failures of parts and assemblies.
• The sediment at the bottom of the bottle is the main working element of the HPFP compound - microparticles of minerals. It is extremely important to thoroughly mix the contents of the bottle before adding it to the fuel tank. (The colour of the sediment may vary from light green to dark grey and black depending on the production batch).
• The exact dosage of the composition is based on the calculation of 1 ml of the composition per 1 litre of fuel.
• Fuel additive HPFP does not affect the characteristics and condition of parts made of composite materials, ceramics and rubber products.