Atomium Active Regular

Atomium Active Regular

Atomium Active Regular
The compound is designed to protect against wear and maintain the performance of diesel, gasoline and LPG engines of passenger vehicles, pretreated with compound «Atomium» of «Active» series.
Volume:100 ml
Price: (inc.VAT)16.2 €


Effects of application

Tribotechnical compounds of ACTIVE series create conditions under which the friction surfaces in engine parts are covered with a metallic protective layer, which has a special structure. This layer keeps more oil on the friction surfaces. Compound «Active Regular» provides support of this layer and its recovery in case of wear and tear, which in turn keeps the engine performance at the level reached at the processing engine with tribotechnical compounds of ACTIVE series. It provides the following effects:

Increasing the resource of the engine operation – protective layer greatly reduces the wear of the most loaded friction parts, which determine engine life. Also, treated surfaces better hold oil, which protects the engine against oil starvation, during overheating, active driving and accidental loss of oil.

Facilitating engine start up and protection during «cold start-up» – treated surfaces are able to retain the oil layer during the lengthy downtime of the engine. It facilitates the first shaft revolutions and prevents increased wear of engine with insufficient oil on friction surfaces at start-up, which is especially important at negative ambient temperature.

Rated motor power – thick oil layer in clearances of the cylinder-piston group provides the necessary gas tightness, which leads to maintaining compression and quality combustion. Dense oil layer displaces the friction regime in the direction of the hydrodynamic, which reduces the friction losses. All this allows to keep the engine power at nominal values.

Low fuel consumption – creating conditions for high-quality fuel combustion and reduction of friction losses provide fuel economy.

Low oil consumption – keeping optimum clearance between the oil ring and cylinder wall prevents oil from entering the combustion chamber and allows to reduce or eliminate the oil burning.

Low level of noise and vibration – recovering of compression in the cylinders leads to smooth engine running. In addition, a dense layer of oil softens work of friction parts. Altogether, this reduces vibration and noise in the engine.

Low toxicity – recovering of compression and optimization of gaps in the cylinder-piston group improves combustion quality, which in turn decreases exhaust CO/CH emissions.


Instructions for application

Engine treatment is carried out after every regular oil change. It is necessary to add compound to new motor oil in accordance with the following procedure:

Warm up the engine to operating temperature (regular operation).

Stop the engine.

Stir Tribotechnical compound «Atomium Active Regular» thoroughly until natural sediments (active components) are totally dissolved.

Apply compound through the regular oil filling neck. Quantity the compound is determined according to the following scheme:


ENGINE TYPE Oil volume in the oil pan The amount used:
Gasoline engine Less than 5 liters 1 can
More than 5 liters 2 cans
Diesel engine Less than 7 liters 1 can
More than 7 liters 2 cans

After applying the engine should run (it is recommended to drive the car) for no less than 20 - 25 min in of the regular operation mode.

After the procedure, you can use the car as usual.


Tribotechnical compound «Atomium Active Regular»

The compound is designed to protect against wear and maintain the performance of diesel, gasoline and LPG engines of passenger vehicles, pretreated with compound «Atomium» of «Active» series.

100 ml

Tribotechnical compound «Atomium Active Regular»

Certified in accordance with the international quality standard
ISO 9001-2008

Storage temperature: from -20 ᵒС to +70 ᵒС
Shelf life: 5 years


Safety precautions and first aid:

It is not expected any health hazard when used under normal conditions.

In case of a contact with skin, wash out with warm water, and then wash again with soap.

In case of contact with eyes, wash out eyes with large amount of water.

In case of swallowing, consult a doctor.


Shelf life: 5 years. Manufacturing date is indicated on the can.

It is not recommended to apply the compound at existence of mechanical breakages of parts and assemblies.

Compound ACTIVE REGULAR is compatible with any type of motor oils.

The sediment on the bottom of the can is the main working element of ACTIVE REGULAR - these are microparticles of minerals. It is crucially important to thoroughly stirthe contents of the can before pouring it in the engine oil system (sediment color, depending on the release batch, can vary from light green to dark grey and black).

Overdose of compound by 1.5 times is not dangerous for the engine and does not disturb its work.

Compound ACTIVE REGULAR does not affect the characteristics and status of parts made of composite materials and rubber.

Additional info